Shandong Decho Building Materials Technology Co., Ltd
Focus on high standard coated coils
Add to Cart
T3 Temper ETP Tin Coated Electrolytic Tinplate Coil The Top Solution For Food And Beverage Packaging JIS G3303 EN10203
Tin mill products encompass several key varieties: electrolytic tinplate, electrolytic chromium coated steel (known as tin free steel or TFS), and Black Plate. Tinplate consists of a thin steel sheet coated with tin, imparting a glossy metallic finish and enhancing properties like corrosion resistance and paintability. TFS, on the other hand, is steel plated with a thin layer of chromium and chromium oxide, delivering similar aesthetic appeal and robust qualities in terms of protection from corrosion and suitability for painting.
Modern tinplate is typically crafted from cold-rolled, low carbon steel, meticulously coated with pure tin on both sides. This composite material synergizes the inherent strength and malleability of steel with the superior corrosion resistance, weldability, and visual appeal of tin. Such tinplate finds extensive applications across various industries, particularly in the food sector for cans and packaging. It also serves in non-food applications such as aerosol cans, bottle caps, gas-containing beverage containers, as well as in the manufacturing of home appliances, toys, stationery, and engineering materials.
Excellent Corrosion Resistance
By selecting a proper coating weight, appropriate corrosion resistance is obtained against container contents.
Excellent Paintability & Printability
Printing is beautifully finished using various lacquers and inks.
Excellent Solderability & Weldability
TIN PLATE is widely used for making various types of cans by soldering or welding.
Excellent Formability & Strength
By selecting a proper temper grade, appropriate formability is obtained for various applications as well as the required strength after forming.
Beautiful Appearance
Electrolytic ETP is characterized by its beautiful metallic luster. Products with various kinds of surface roughness are produced by selecting the surface finish of the substrate steel sheet.
| Nominal Coating Weight g/m | Standard (g/m2 ) | ||
| Average / side | Single point | Target Value | |
| Minimum | Minimum | ||
| 1.1 | 0.9 | 0.8 | 1.0 |
| 1.4 | 1.12 | 1.08 | 1.3 |
| 2.0 | 1.6 | 1.56 | 1.9 |
| 2.2 | 1.8 | 1.76 | 2.1 |
| 2.4 | 1.92 | 1.88 | 2.3 |
| 2.5 | 2.0 | 1.98 | 2.4 |
| 2.8 | 2.45 | 2.2 | 2.6 |
| 3.0 | 2.61 | 2.5 | 2.8 |
| 4.0 | 3.48 | 3.2 | 3.8 |
| 5.0 | 4.35 | 4.2 | 4.8 |
| 5.6 | 5.05 | 4.8 | 5.4 |
| 8.4 | 7.55 | 7.55 | 8.4 |
| 11.2 | 10.1 | 10.1 | 11.2 |
| GB/T2520, JIS G3303 | EN10202 | TARGET VALUE | TOLERANCE RANGE | YIELD STREGNTH/MPA | TENSILE STRENGTH/MPA |
| T-1 | TS230 | 49 | 49±3 | 230±50 | 325±50 |
| T-2 | TS245 | 53 | 53±3 | 245±50 | 340±50 |
| T-2.5 | TS260 | 55 | 55±3 | 260±50 | 360±50 |
| T-3 | TS275 | 57 | 57±3 | 275±50 | 375±50 |
| T-3.5 |
| 59 | 59±3 | 290±50 | 390±50 |
| T-4 | TH415 | 61 | 61±3 | 415±50 | 435±50 |
| T-5 | TH435 | 65 | 65±3 | 435±50 | 460±50 |
| DR-7M | TH520 | 71 | 71±3 | 520±50 | 540±50 |
| DR-8 | TS550/TH550 | 73 | 73±3 | 550±50 | 570±50 |
| DR-8M | TH580 | 73 | 73±3 | 580±50 | 590±50 |
| DR-9 | TH620 | 76 | 76±3 | 620±50 | 625±50 |
| DR-9M |
| 77 | 77±3 | 660±50 |
|
| DR-10 |
| 80 | 80±3 | 690±50 |
|
| The hardness is the average value of 2 samples, allowing 1 of them to exceed the specified allowable range by 1 unit. | |||||
| a The yield strength is a reference value determined as required. b Yield strength is the average value of the two samples. The sample is P5 in GB/T 228, and the direction of the sample is transverse. c Due to the thickness thinning effect, the elongation is too low and the yield strength cannot be measured. In this case, the yield strength is replaced by the tensile strength. d For the tensile test, the width of the parallel part of the sample is (12.5±1) mm, and the standard distance L0=50mm. Before the test. The sample should be artificially aged for 20min at 200℃. | |||||
| Thickness | Tolerance | ||
| Negative Tolerance | Tolerance | Positive tolerance | |
| 0.18～0.55 SR | +1%～—3% | +2%～—2% | +0%～+3% |
| 0.15～0.34 DR | +1%～—3% | +2%～—2% | +0%～+3% |
| Remarks | The internal control is set at-0.002mm of the thickness of the contract order. The measurement value of the midpoint in the width direction of the strip shall prevail. | The internal control sets the thickness of the contract order thickness. The measurement value of the midpoint in the width direction of the strip shall prevail. | The internal control is to set the thickness of the contract order at +0.003mm, and the measured value at the midpoint of the strip width direction shall prevail. |
| 1. The thickness of S1, S2, S3 surface and M surface shall be measured by the flat thickness meter. (The matt surface will be higher than the actual measurement due to surface roughness.) | |||
4. Product Standard
ETP orders are placed with Baosteel in accordance with Q/BQB 450-2009 standard which uses in a non-equivalent to JIS G 3303:2008, DIN EN 10202:2001, EN 10203 standards.
TFS orders are placed with Baosteel in accordance with Q/BQB 455-2009 standard which uses in a non-equivalent to JIS G 3315:2008, DIN EN 10202:2001, EN 10203 standards.
5. Usage Precautions for ETP
Market status and prospect analysis of electroplated tin plate at home and abroad.
As the main consumption area of electroplated tin plate cans, whether as food (fish, meat, fruit, vegetables, etc.), beverages (alcoholic beverages, such as beer, etc., non-alcoholic beverages, such as carbonated beverages, fruit juices, coffee, etc.), Or as a packaging material for other items (drugs, oils, paints, cosmetics, sprays, etc.), with its advantages of keeping fresh for a long time, not easy to pollute, easy to circulate, low cost, easy to recycle, etc., it has been developing steadily for more than two hundred years, showing good prospects for development.